ESYLUX MD-FLAT 360i/8 Manual de Usario

Lee a continuación 📖 el manual en español para ESYLUX MD-FLAT 360i/8 (18 páginas) en la categoría detector de movimiento. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/18
1
MA00744003
ESYLUX GmbH | An der Strusbek 40
22926 Ahrensburg | Germany
info@esylux.com | www.esylux.com
Detailed operating instructions
MD-FLAT 360i/8 RW
EP10427886
MD-FLAT 360i/8 SW
EP10427893
MD-FLAT 360i/8 RB
EP10428074
MD-FLAT 360i/8 SB
EP10428081
MD-FLAT-E 360i/8 RW
EP10428548
MD-FLAT-E 360i/8 RW GST
EP10427862
MD-FLAT-L 360i/8 RW
EP10428609
OPERATING INSTRUCTIONS
2 / 18
GB
MD-FLAT 360i/8 RW MD-FLAT 360i/8 SB MD-FLAT-L 360i/8 RW
MD-FLAT 360i/8 SW MD-FLAT-E 360i/8 RW
MD-FLAT 360i/8 RB MD-FLAT-E 360i/8 RW GST
Table of contents
1 Description 3
2 Safety instructions 3
3 Operation / functionality 4
3.1 Conditions in which the lighting is switched on 4
3.2 Conditions in which the lighting is switched off 4
3.3 Switching delay – not in pulse mode 4
4 Installation / connection 5
4.1 Masking the field of detection 7
5 Activation 7
5.1 Overview of factory settings 7
6 Settings 8
6.1 Control via external “S” button 8
6.2 Configuring parameters via remote control 8
6.3 Mobil-PDi/MDi 8
6.4 Mobil-PDi/MDi temporary settings 9
6.5 Programming the Mobil-PDi/MDi 10
6.6 Mobil-PDi/MDi-universal 12
6.7 Mobil-PDi/MDi-universal temporary settings 12
6.8 Programming the Mobil-PDi/MDi-universal 13
7 Technical data 16
8 Troubleshooting 16
8.1 Maintenance 17
8.2 Cleaning 17
9 ESYLUX Manufacturer’s guarantee 18
OPERATING INSTRUCTIONS
3 / 18
GB
MD-FLAT 360i/8 RW MD-FLAT 360i/8 SB MD-FLAT-L 360i/8 RW
MD-FLAT 360i/8 SW MD-FLAT-E 360i/8 RW
MD-FLAT 360i/8 RB MD-FLAT-E 360i/8 RW GST
1 Description
The ESYLUX ceiling-mounted motion detector is a passive infrared presence detector
that responds to moving heat sources, such as people walking.
The motion detector is designed for areas with low levels of natural light, such as
hallways, cellars, staircases, changing rooms, toilets, garages etc.
Parameters can be configured using the ESYLUX Mobil-PDi/MDi and Mobil-PDi/MDi-
universal remote controls as well as via the manual setting elements.
Note: Use this product only as intended (as described in the user instructions).
The device must not be changed, modified or painted doing so will void any warranty
claims. You must check the device for damage immediately after unpacking it.
If there is any damage, you should not install the device under any circumstances.
If you suspect that safe operation of the device cannot be guaranteed, you should turn
the device off immediately and make sure that it cannot be operated unintentionally.
2 Safety instructions
Work on the 230-V power system must be carried out by authorised personnel only,
with due regard to the applicable installation regulations/standards
Switch off the power supply before installing the system
On the input side, the device is to be protected against short circuits with a 10-A circuit
breaker
Protection type IP 20 for interior use

Especificaciones del producto

Marca: ESYLUX
Categoría: detector de movimiento
Modelo: MD-FLAT 360i/8

¿Necesitas ayuda?

Si necesitas ayuda con ESYLUX MD-FLAT 360i/8 haz una pregunta a continuación y otros usuarios te responderán




detector de movimiento ESYLUX Manuales

detector de movimiento Manuales

Últimos detector de movimiento Manuales