Gossen Metrawatt POINTAX 6000M Manual de Usario

Gossen Metrawatt Equipo de medición POINTAX 6000M

Lee a continuación 📖 el manual en español para Gossen Metrawatt POINTAX 6000M (16 páginas) en la categoría Equipo de medición. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/16
Operating Instructions
POINTAX 6000M
Point Recorder 3-348-819-03
2/8.18
Contents
Page
Application and brief description
The POINTAX 6000M is a microprocessor-controlled point
recorder. It is supplied in two different versions:
– scale version with 1 to 6 scale divisions,
– display version (no more available)
The recorder is connected to transducers and/or directly to ther-
mocouples or resistance thermometers. The measuring channels
are electrically isolated and earth-free. The recorder is matched to
the measuring task via the software by means of
– keys of the display and operating panel
– PC and parameterizing program PARATOOL P6000M
via the RS 485 interface.
Standard temperature sensor curves are stored in the firmware of
the recorder and linearized with high accuracy. Supplementary
functions like text print, balancing function and event marker
increase the information content of the print-out process quantity.
Alarm signalling and remote control make the recorder a device to
be used in a wide range of applications. The standby function
makes triggered recording operation possible.
Reference symbols in the text
<Key> Designation of the keys in the display and control
panel
{ }Display Non-flashing presentation on the display
{ }Display Flashing presentation on the display
The information "right", "left" or "top", "bottom" – unless other-
wise stated – is on the understanding that the viewer looks at the
front.
Supplementary documents
Parameterizing instructions POINTAX 6000M (Scale version)
Interface description POINTAX 6000M
(can be downloaded from our website)
Important information for your safety!
It must absolutely be read and followed!
A condition of correct and safe operation of the point
recorder POINTAX 6000M is that it is transported and stored
in a suitable manner, competently installed and started as
well as operated correctly and serviced carefully.
Only those persons must work on the recorder who are famil-
iar with installation, startup, operation and servicing of com-
parable equipment and who have the qualification required
for their work.
The contents of these operating instructions and the safety
notes affixed to the unit are to be observed.
The regulations, standards and directives mentioned in these
operating instructions are for the Federal Republic of Ger-
many. When using the recorder in other countries, relevant
national rules must be followed.
The recorder is constructed and tested in accordance with
DIN EN 61010-1 "Safety requirements for electronic measur-
ing, open-loop control, closed-loop control and laboratory
instruments“, it left the factory in safe and proper condition.
To maintain this condition and to ensure safe operation, the
safety notes in these operating instructions with the heading
"Caution" must be followed. Otherwise, persons could be
endangered and the unit itself as well as other equipment and
facilities could be damaged.
If the information contained in these operating instructions
should not be sufficient in certain cases, our product support
(see page 15) will be glad to provide further information.
2 GMC-I Messtechnik GmbH
1 Installation and startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1 Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.2 Mounting site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.4 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
1.5 Placing the recording chart . . . . . . . . . . . . . . . . . . . . . . 5
1.6 Placing the color head . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1.7 Switching the recorder on . . . . . . . . . . . . . . . . . . . . . . . 6
1.8 Positioning the recording chart . . . . . . . . . . . . . . . . . . . 6
2 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.1 Removing the recording chart . . . . . . . . . . . . . . . . . . . . 7
2.2 Removing the recording chart from the
take-up reel . . . . . . . . . . . . . . . . . . . . . . . (see Figure 12) 7
2.3 Changing the chart speed . . . . . . . . . . . . . . . . . . . . . . . 7
2.4 Standby function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.5 Measured value display . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.6 Balancing function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.7 End-of-chart signalling . . . . . . . . . . . . . . . . . . . . . . . . . . 8
3 Parameterizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4 Reconfiguration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.1 Firmware update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.2 Replacing scales . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
4.3 Replacing the label for measuring points
(see Figure 16 and Figure 17). . . . . . . . . . . . . . . . . . . . . 10
4.4 Replacing the case doors . . . . . . . . . . . . . . . . . . . . . . 10
5 Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5.1 Fuse replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
7 Packing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
8 Returns and Environmentally Sound Disposal . . . . . . . . . . . 15
9 Repair and Replacement Parts Service
Calibration Center* and
Rental Instrument Service. . . . . . . . . . . . . . . . . . . . . . . . . . 15
10 Product Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
GMC-I Messtechnik GmbH 3
1 Installation and startup
1.1 Scope of delivery (see Figure 1)
The point recorder comes with:
– operating instructions
– 2 fasteners Be
– 1 color head Fk
– 1 package fanfold chart Fp or 1 chart roll Sr
– Depending on the order, the respective number of screw-plug
terminals Sk, one zener diode combination per measuring sys-
tem, 9-pole sub D plug and reading rulers.
Figure 1 Scope of delivery of the POINTAX 6000M
1.2 Mounting site
Figure 2 Dimensional drawing POINTAX 6000M (dimensions in mm)
Position of use Inclin. to the side –30° °... 0 ... +30
Inclination to the rear 20°
Inclination to the front 20°
Ambient temperature 0 ... 50 °C
Relative humidity ≤ 75 % annual average, max. 85 %,
prevent dewing!
1.3 Installation (see Figure 2 and Figure 3)
Installation in switchboards
1. Insert the recorder from the front into the switchboard.
2. Push the fasteners Be in the guiding grooves at the side of the
case (see Figure 3).
Note
The fasteners Be are suitable for side-by-side mounting in hori-
zontal or vertical direction.
3. After aligning, equally tighten the fasteners.
Installation in grid frames
1. Fasten 4 centering angle brackets (Ordering number A416A)
on the grid frame.
2. Push the fasteners Be in the guiding grooves at the side of the
case (see Figure 3).
3. After aligning, equally tighten the fasteners.
Figure 3 Inserting the fasteners
Be Fastener
Fk Color head
Fp Fanfold chart
Sk Screw-plug terminals
Sr Chart roll
294 14.5144
138+1.0
0
100°
Panel cutout

Especificaciones del producto

Marca: Gossen Metrawatt
Categoría: Equipo de medición
Modelo: POINTAX 6000M

¿Necesitas ayuda?

Si necesitas ayuda con Gossen Metrawatt POINTAX 6000M haz una pregunta a continuación y otros usuarios te responderán


Equipo de medición Gossen Metrawatt Manuales

Gossen Metrawatt

Gossen Metrawatt SECULIFE ST M693A Manual de Usario

19 Septiembre 2024
Gossen Metrawatt

Gossen Metrawatt METRALINE VT SENSE M611K Manual de Usario

18 Septiembre 2024
Gossen Metrawatt

Gossen Metrawatt METRALINE EARTH M590R Manual de Usario

17 Septiembre 2024
Gossen Metrawatt

Gossen Metrawatt METRA Hit 27Ex Manual de Usario

16 Septiembre 2024
Gossen Metrawatt

Gossen Metrawatt METRAOHM 10 Manual de Usario

15 Septiembre 2024
Gossen Metrawatt

Gossen Metrawatt POINTAX 6000M Manual de Usario

14 Septiembre 2024
Gossen Metrawatt

Gossen Metrawatt METRAHIT CAL Manual de Usario

14 Septiembre 2024
Gossen Metrawatt

Gossen Metrawatt PROFITEST PV Manual de Usario

13 Septiembre 2024
Gossen Metrawatt

Gossen Metrawatt METRAPhase 1 Manual de Usario

13 Septiembre 2024
Gossen Metrawatt

Gossen Metrawatt SECUTEST 21F Manual de Usario

13 Septiembre 2024

Equipo de medición Manuales

Últimos Equipo de medición Manuales

PeakTech

PeakTech 1207 Manual de Usario

26 Octubre 2024
Kern

Kern FL 1KG Manual de Usario

25 Octubre 2024
PeakTech

PeakTech 6193 Manual de Usario

25 Octubre 2024
PCE Instruments

PCE Instruments PCE-TUM 50 Manual de Usario

24 Octubre 2024
PCE Instruments

PCE Instruments PCE-325D Manual de Usario

23 Octubre 2024
PCE Instruments

PCE Instruments PCE-AM 30 Manual de Usario

23 Octubre 2024
PCE Instruments

PCE Instruments PCE-900 Manual de Usario

23 Octubre 2024
PCE Instruments

PCE Instruments PCE-CSM 10 Manual de Usario

23 Octubre 2024
PCE Instruments

PCE Instruments PCE-CSM 7 Manual de Usario

23 Octubre 2024
PCE Instruments

PCE Instruments PCE-CSM 3 Manual de Usario

23 Octubre 2024